Caring For Your Range
Continued
3. Lift out the reflector bowl. See “Cleaning tips” on page 34 for cleaning instructions.
Replacing
Burn, Electrical Shock and Fire
Hazard
l Make sure all surface units are OFF before replacing surface units and reflector bowls. Failure to do so can result in burns or electrical shock.
l Do not line the reflector bowls with foil. Fire or electrical shock could result.
Line up openings in the reflector bowl with the surface unit receptacle.
Hold the surface unit as level as possible with the terminal just started into the receptacle.
While pushing the surface unit terminal into the receptacle, lift a little on the edge of the unit nearest the receptacle.
When the terminal is pushed into the receptacle as far as it will go, the surface unit will fit into the reflector bowl.
Reflector bowls reflect heat back to the utensils on the surface units. They also help catch spills. When they are kept clean, they reflect heat better and look new longer.
22
