4.Use the Hour and Minute pads to set the desired start time. Push the “up” (A) or “down” (V) pad(s) until the correct time shows in the display.
This example shows a desired start time of 2 o’clock.
5.Push the Stop Time pad. The time of day with the colon flashing will show in the display and STOP TIME will light up.
6.Use the Hour and Minute pads to set the desired stop time. Push the “up”(A) or “down” (V) pad(s) until the correct time shows in the display.
This example shows a desired stop time of 2:30. This provides a cook time of 30 minutes (the difference between the start and stop times).
NOTE: If you do not set a stop time, the colon will flash in the display and STOP and COOK will flash alternately to remind you to program a stop time or a cook time. (See page 21 for instructions on how to set delay start and stop automatically using Cook Time and Start Time.)
7.Push the Start/Enter pad. DELAY and BAKE will light up in the display to show that the oven is programmed to start at a later time. NOTE: The display will show “door”and a tone will sound once a minute for 5 minutes if the door is latched when you try to bake/ roast.
You can change the temperature or time settings any time after pushing the Start/Enter pad by repeating just Steps 2 through 6.
24
