Whirlpool RS677PX PROBLEM Cooking results are not what you expected, The display shows “PF”

PROBLEM

Cooking results are not what you expected

The display shows “PF”

“Fl” or “F3” shows in the display

POSSIBLE CAUSE

The range is not level.

The oven temperature seems too low or too high.

You have not preheated the oven as the recipe calls for.

The recipe has never been tested or is not from a reliable source.

The pan used is not the type or size recommended in the recipe.

There is not proper air circulation around pan when baking.

Cooking utensil does not fit the surface unit being used.

There has been a power failure.

SOLUTION

Level range. (See Installation Instruc- tions.)

Adjust the oven temperature control. (See “Adjusting the oven temperature control” on page 15.)

Preheat oven when called for in recipe.

Use only tested recipes from a reliable source.

Refer to a reliable cookbook for recommended pan type and size.

Allow 1% to 2 inches (4-5 cm) of air space on all sides of pan. There must be a minimum space of 1 inch

(2.5 cm).

Pan shouM be the same size or slightly larger than surface unit being used.

Reset the clock. (See page 12.)

Call for service. (See Step 3 on page 39.)

38