Whirlpool RS677PX important safety instructions Whirlpool Corporation

2.For best results, wipe off surface units with a damp sponge and soapy water after each use. Remove burned-on food with a soap-filled scrubbing pad. Rinse well. The red spot in the center of the surface unit will gradually wash off. This is normal and will not affect the operation of the surface unit.

NOTE: Make sure plastic scrubbing pad does not contain metal or abrasive particles. Do not use abrasive cleaners.

3.IMPORTANT: Dry the element com- pletely after cleaning. Turn on the element for a few minutes to dry thor- oughly. After the element has cooled, use a paper towel to apply a thin coat of sak-free oil to the surface units to season and restore the finish. Wipe excess oil off black trim rings. Then heat 3-5minutes. Some smoking may occur; this is normal. If surface units have dark spots caused by grease and food, the oil treatment will improve their appearance, but not elimi- nate the spots.

Optional: You can apply ElectroP dressing to the surface units to improve their appearance.

To order information for ElectroP Dressing (Part No. 814030) write to:

Whirlpool Corporation

Attention: Customer Service Department

1900 Whirlpool Drive

LaPorte, IN 46350

OR

Call 1-800-253-1301 to order. You must have a major credit card to order by phone.

34