2.Use the Hour and Minute pads to set the desired time. Push the “up”(A) or “down”
(V)pad(s) until the correct time shows in the display.
RR
3.Push the Start/Enter pad. The Minute Timer will begin counting down immedi- ately after the timer is started.
When time is up, “End” will show in the large display and you will hear four
NOTE: To disable the reminder tones, push and hold the Timer Set pad for 4 seconds. To reactivate the tones, follow the same procedure.
To cancel the Minute Timer:
l Push the Timer Off pad. The time of day will show in the display.
Using the Off/Cancel pad
The Off/Cancel pad will cancel any com- mand pad except for the Clock/Set and Timer Set pads. When you push the Off/ Cancel pad, the display will show the time of day or, if Minute Timer is also being used, the time remaining.
Audible signals
Audible signals tell you if a function is entered correctly or not. They also tell you when a cycle is completed.
To shut off all signals except for the end-
1.Press and hold the Stop Time pad for 4 seconds.
2.A short tone will sound to tell you the signals have been changed.
Repeat the above steps to turn the signals back on.
13