Siemens SIMATIC NET PROFIBUS OLM Module P11 G11 G11-1300 P12 G12 G12-1300, Voltage/power supply

7	Technical Data
7	Technical Data
OLM Module		P11	G11	G11-1300
		P12	G12	G12-1300
			G12-EEC
Voltage/power supply
Operating voltage		18 V to 32 V DC, typ. 24 V, (redundant inputs uncoupled),
		safety extra-low voltage, indirect-coupled
Current consumption		max. 200 mA
Output voltage/current for terminal		5 V +5%, – 10%/90 mA; short circuit-proof
resistors (Pin 6 Sub-D socket)
Signaling contact
	Maximum switch voltage	60 V DC; 42 V AC (safety extra-low voltage)
	Maximum switch current	1.0 A
Signal transmission
Transmission rate		9.6; 19.2; 45.45; 93.75; 187.5; 500 kBit/s
		1.5; 3; 6; 12 Mbit/s
Setting transmission rate		automatic
Bit error rate		< 10-9
Signal processing time (any input/output)		≤ 6.5 tBit
Retimer
Input Port 1 to 3
	Signal distortion	±30 %
	Bit length	±0.12 %
Output Port 1 to 3
	Mean bit length	±0.01 %
Safety
VDE regulation		VDE 0806 = EN 60950 and IEC 950
UL/CSA approval		UL 1950/CSA 950
FM approval		in preparation (Class 2)
Electrical port
Input/output signal		RS 485 level
Input dielectric strength		– 10 V to +15 V
PIN assignment, port 1		in accordance with EN 50170 Part 1
Indirect-coupled		yes, within SELV limits
Optical ports
Wavelength		660 nm	860 nm	1310 nm
Launchable optical power
– in glass fiber E 10/125		–	–	– 19 dBm
– in glass fiber G 50/125		–	– 15 dBm	– 17 dBm
– in glass fiber G 62.5/125		–	– 13 dBm	– 17 dBm
– in PCF fiber S 200/230
	transmitting power ”Reduced“	–	–	–
	transmitting power ”Default“	– 17 dBm	–	–
– in plastic fiber S 980/1000
	transmitting power ”Reduced“	– 9.5 dBm	–	–
	transmitting power ”Default“	– 5 dBm	–	–
Receiver sensitivity		– 25 dBm	– 28 dBm	– 29 dBm
Receiver overload		– 3 dBm	– 3 dBm	– 3 dBm

Version 1.0 8/00 31