Siemens SIMATIC NET PROFIBUS manual CE Designation

8 Appendix 8.1 CE Designation

8Appendix

8.1CE Designation

Product Designation	SIMATIC NET
		OLM/P11		6GK1502-2CA00
		OLM/P12		6GK1502-3CA00
		OLM/G11		6GK1502-2CB00
		OLM/G12		6GK1502-3CB00
		OLM/G11-1300		6GK1502-2CC00
		OLM/G12-1300		6GK1502-3CC00
		OLM/G12-EEC		6GK1502-3CD00
EMC Directive	The SIMATIC NET products named above fulfill the requirements of the following
	EC directives:
			Directive 89/336/EEC
			"Electromagnetic Compatibility"
Application	The product is designed for use in the following areas:
		Area of			Requirement for
		application			Interference emissions	Interference immunity
		Domestic, business and			EN 50081-1: 1992	EN 50082-1: 1997
		commercial use, as well
		as in small factories
		Industrial plants			EN 50081-2: 1993	EN 50082-2: 1995
Observe assembly	The product complies with the specifications if the assembly guidelines and safety
guidelines	instructions are observed during installation and operation as described in this
	”Description and Operating Instructions SIMATIC NET Optical Link Modules“ and
	the following documentation:
		SIMATIC NET PROFIBUS Networks Manual
Declaration of	In accordance with the above-named EC directive, the EC Declaration of Conformity
Conformity	can be viewed by the authorities responsible at:
		Siemens AG
		Bereich Automatisierungs- und Antriebstechnik
		Geschäftszweig Industrielle Kommunikation SIMATIC NET
		Postfach 4848
		D-90327 Nürnberg
Machine Directive	Furthermore, the product is a component in accordance with Article 4(2) of the
	EC Machine Directive 89/392/EWG.

In accordance with the Machine Directive, we are obliged to draw attention to the fact that the designated product is solely designed for installation in a machine. Before the end product is put into operation, it must be ensured that it conforms with the directive 89/392/EEC.

Version 1.0 8/00 33