Siemens SIMATIC NET PROFIBUS manual Technical Specifications

Infrared Link Modul (ILM) 6ZB530–3AC30–0BA1

11	Technical Specifications
Operating voltage			24 V DC (20 V to 30 V)
Safety extra-low voltage (SELV)
Current consumption			ma⋅ . 300 mA
Transmission rate			9.600 Kbps; 19.200 Kbps; 45.45 Kbps, 93.75 Kbps;
			187.5 Kbps; 500 Kbps; 1.5 Mbps;
Setting the transmission rate			Using 3 DIP switches
Setting the mode			Using 5 DIP switches
Bit error rate			<10–6
Signal delay time			<= 6 bit times
RS 485 input →		infrared output
Signal delay time			<= 3 bit times
infrared input →		RS 485 output
Electrical channel
Input/output signal			RS 485 level
Input voltage dielectric strength			–10 V to )15 V
Interface signals			Ungrounded within the SELV limits
Terminating resistors			Activated with DIP switch
Optical channel
Optical source			21 LEDs
Optical power			280 mW effective with alternating 0–1 sequence
Receiver sensitivity			0.5 A/W
			– 28 dBmW
Wavelength			860 nm to 880 nm
Distance between two ILMs			maximum 15 m in the optical axis
			12 m at )/–2 m distance from the optical axis
Signaling contacts			Limit values of the relay
			maximum switching power	30 W
			Maximum switching voltage	30 V DC
			Maximum switching current	1.0 A
Table 3:	Technical Specifications of the PROFIBUS ILM

Copyright  by Siemens 46