Caring For Your Oven
Continued
4. Wash control knobs with warm, soapy water and a sponge. Rinse well and dry with a soft cloth. Do not soak.
5. Replace control knobs by pushing them firmly into place.
NOTE: When cleaning, never use steel wool, abrasives, or commercial oven cleaners which may damage the finish. After cleaning, make sure all control knobs point to OFF.
Removableovendoors
Removing the oven doors will help make it easier to clean the ovens.
Burn and Electrical Shock Hazard
Make sure all controls are OFF and the ovens are cool before removing oven doors.
Failure to do so can result in burns or electrical shock.
1. Open a door to the first stop position.
2. Hold the door at both sides and lift it at the same angle it is in.
3. To replace, fit the bottom corners of the door over the ends of the hinges.
Push the door down evenly. The door will close only when it is on the hinges correctly.
Removaland replacementof oven
If the oven is removed after installation, you must follow this procedure:
1. Shut off main gas supply valve to oven.
2. Remove mounting screws and remove unit from cabinet.
3. Disconnect electrical supply cord.
4. Disconnect the oven from the main gas supply line. Make sure you do Step 1 before discon- necting the gas supply from the oven.
5. When reinstalling the oven, follow the directions given in the Installation Instructions.
12
