Whirlpool SF317PEX, SF337PEX Setting the clock and timer, To set time of day, To set the timer

Setting the clock and timer

The clock/timer acts as both a time-of- day clock and as a minute timer.

To set time of day:

When the range is connected to power, the clock display will blink at 88:88 until the time-of-day is set. To set time-of-day, depress the Set Button once. The triangle and clock signal lights on the display will light up and remain lit until the time is set. Within 15 seconds, turn the Clock/Timer Knob to the correct time.

To set the timer:

Turn the ClocWTimer Knob clockwise to the desired setting, up to 9 hours 50 minutes. (Knob must be turned four or five clicks before time will advance.) The triangle and bell signal lights will light up. The timer will count down the time while flashing the time-of-day every 12 seconds. Three beeps will sound at the end of the set time and the signal lights will go off.

To cancel the Minute Timer before the countdown is completed:

Turn the Set Knob to “0:OO.” If no other time is set within three seconds, the time-of-day will reappear on the display.