Clock

Feature Change

When setting the clock or using the Minute Timer, please use the following instructions instead of those found in your Use and Care Guide.

Setting the clock

When the range is connected to power, the clock display will blink at “88:88” until the time-of-day is set.

1. Push and hold the Set button while turning the Set Knob in either direction to the correct time-of-day.

2. Release the Set button after the time- of-day is set.

Using the Minute Timer

The Minute Timer does not start or stop the oven. It works like a kitchen timer. It can be set in minutes and seconds up to 60 minutes.

Turn the Set Knob clockwise to the desired setting (up to 60 minutes). The Minute Timer will count down and the colon will flash. When the set time is up, a tone will sound.

Press the Set button. The tone will stop and the display will show the time-of-day.

To check time-of-day when using

Minute Timer:

Push and hold the Set button. The time- of-day will appear.

To return to the Minute Timer display:

Release the Set button. The Minute

Timer will continue to count down.

To cancel the Minute Timer before the countdown is completed:

Turn the Set Knob to “0:OO“If. no other time is set within three seconds, the time- of-day will reappear on the display.

Page 9
Image 9
Whirlpool SF337PEX, SF317PEX manual To check time-of-day when using Minute Timer, To return to the Minute Timer display