Whirlpool SF378PEW warranty Special, tips, To stop the Self-Cleaningcycle at any time

4.Move the Lock Lever to the right -the Clean position. This will start the Self- Cleaning cycle. If the door is not completely closed or the Lock Lever is not all the way to the right, the cycle will not start.

5.When the oven temperature goes above normal baking/roasting temperatures, the door cannot be opened and the Lock Lever must not be moved. When the oven temperature reaches about 7OO”F, the Clean Indicator Light will go on.

6.After the Self-Cleaning cycle is com- pleted and the oven reaches normal baking/roasting temperatures, the Clean Indicator Light will go off. Move the Lock Lever back to the left. DO NOT FORCE IT. Wait until it moves easily. Turn the Oven Selector and Oven Temperature Control to OFF.

7.After the oven is cool, wipe off any residue or ash with a damp cloth. If needed, touch up spots with a soapy steel-wool pad.

To stop the Self-Cleaning cycle at any time:

1.Push in and turn the Stop Time Knob clockwise until it points to the correct time of day.

2.Turn the Oven Selector and Oven Tem- perature Control to OFF. When the Clean Indicator Light goes off, move the Lock Lever back to the left. DO NOT FORCE IT. Wait until it moves easily.

Special

tips

l Keep the kitchen well ventilated

during the

l If the Self-Cleaning

cycle

does not

get

Self-Cleaning

cycle

to help get

rid of heat,

the

oven

as clean

as you

expected,

the

odors,

and smoke.

cycle may not have been set long enough

l After

the oven

is cool, wipe

up any

or you may not have prepared

the oven

residue

or ash

with

a damp cloth or sponge.

properly.

Set the Self-Cleaning

cycle

longer

If any

spots remain,

clean with

a mild

the

next

time and

hand-clean

areas

noted

abrasive

cleanser or cleaning

sponge.

on

page

22.

l Clean the oven before it gets heavily soiled. Cleaning a very soiled oven takes longer and results in more smoke than usual.

24