SET
5. Press CLOCK once. The display will show the
day of the week as an abbreviation (MO for Monday, TU for Tuesday, etc.).
6. Press and hold either TIMEFWD or BACKTIME until you
reach the current day of the week.
7. Press PRGMRUN once. The display will show the correct time and room temperature alter- nately.
Program Heating/Cooling Temperatures
During programming, if you don’t press any buttons for 5 minutes, the thermostat will enter the HOLD mode and will maintain a constant temperature. The display will revert to the alter- nating time/temperature display. To resume pro-
gramming after this happens, press PRGMVIEW until
you are at the point where you stopped program- ming. hen you may continue to enter your pro- gram normally. If you want to stop programming
at any time, simply press PRGMRUN to resume pro- gram operation.
1. Press | SYSTEM | until HEAT is displayed. |
SWITCH |
2. Press TEMPVIEW once. The display will continue
to show HEAT. Below HEAT is the letter A, representing the first programmed heating temperature (HEAT A). At the right of the display is the currently programmed HEAT
A setting.
3.Press either 
or 
to change the temperature to your selected HEAT A set- ting.
25
