Windsor CDT7IS/10080080, CDT7IE/10080070, CDT7IB/10080060 Operations, 3-6ENG, Correct, Incorrect

1/8in (3mm)

CORRECT

INCORRECT

STEP

1

STEP

2

STEP

3

OPERATIONS

Remove electrical cord and literature from recovery tank. Fill solution tank (see filling operations, page 3-5).

Plug cord into grounded outlet. Note: Be sure dome is seated on recovery tank, and float shut-off is installed correctly.

Adjust brush to proper setting. Note: For good operation the brush must skim the carpet. If circuit breaker trips raise brush to prevent damage to motor or carpet.

PUMPVACUUM

ONON

STEP

4

Turn on both Vacuum and Pump motor switches (“ON”=“I”).

CADET 86038340 04/19/07 3-6ENG