MACHINE JACKING

The machine may be jacked up for service or inspection by using the specified jack locations. Always block the tires when jacking up the machine.

FOR SAFETY: Before leaving or servicing machine; Stop on level surface, set parking brake, turn off machine and remove key.

The rear jack points are the frame just behind the rear wheels. Remove the squeegee tool before jacking.

NOTE: See Squeegee Tool Removal in Maintenance Section.

The front jacking point is the front bumper.

TO JACK UP MACHINE

1.Empty the recovery and solution tank.

2.Turn the key switch off and set the parking brake.

FOR SAFETY: Before leaving or servicing machine; Stop on level surface, set parking brake, turn off machine and remove key.

3.Block the tires that are not being raised to prevent the machine from rolling.

FOR SAFETY: When servicing machine, block machine tires before raising machine.

4.Using a jack of adequate capacity. Raise the machine using the designated jack points.

FOR SAFETY: When servicing machine, use hoist or jack of adequate capacity, jack machine at designated jack locations only. Block machine with jack stands when raised.

5.When machine is raised, use jack stands at the designated jack locations.

Support the front of the machine by placing jack stands or solid wood blocks under the U-shaped stabilizer bars.

FOR SAFETY: Block machine at designated jack locations with jack stands when raised.

6.Slowly lower the machine onto the jack stands.

7.Be sure that the machine is secure.

8.Service or inspect the machine as required.

9.When finished working on the machine, raise the machine off the jack stands.

10.Remove the jack stands.

11.Lower the machine to the floor. Block wheels as they are lowered.

12.Remove wheel block after machine has been completely lowered.

JACKING MACHINE

MACHINE STORAGE

If the machine is to be stored for extended periods of time, the following steps must be taken to minimize the chance of corrosion or deposits forming.

1.Drain both solution and recovery tanks. Clean soil and chemical build up from tank. Flush with clean water including the solution delivery system. Leave solution tank lid and recovery tank dome open.

2.Raise the rear squeegee assembly and the scrub deck.

3.Remove brushes and rinse with clean water. Dry thoroughly.

4.Wash squeegee blades with clean water.

5.Park the machine in a cool, dry area.

6.Check the charge level of the batteries monthly. Recharge when batteries drop below 25% charge.

If suitable space exists to store batteries from machine, remove from machine.

7.Perform next lubrication interval.

86037580 GLIDE 01/03/07

4-16

 

Page 38 Page 40
Page 39
Image 39
Windsor 10052450, SG32, SG36, SG28, 10052460, 10052470 Jacking Machine, Machine Jacking, To Jack UP Machine, Machine Storage
Page 38 Page 40

10052460, SG28, SG32, 10052450, 10052470 specifications

Windsor SG32, 10052470, 10052450, 10052460, and SG36 represent a line of cutting-edge products that have gained recognition for their innovative design and advanced technology. These models are characterized by their user-centric features tailored to enhance efficiency and comfort across various applications.

The Windsor SG32 stands out with its robust build and high-performance capabilities. Featuring a powerful motor, the SG32 is tailored for heavy-duty tasks, ensuring that it can handle extensive cleaning jobs with ease. Its ergonomic design allows for extended use without discomfort, making it a favorite among users who prioritize convenience and efficiency. The integrated dirt sensor technology is a notable feature that optimally adjusts the cleaning power based on surface conditions, guaranteeing thorough cleaning results every time.

Models 10052470, 10052450, and 10052460 share a commonality in their advanced filtration systems. These systems are designed to capture airborne particles effectively, making these models ideal for environments requiring enhanced air quality, such as hospitals and schools. The easy-to-replace filter cartridges reduce maintenance time, allowing users to focus on more critical tasks. Additionally, these models incorporate energy-efficient motors that minimize power consumption while maximizing performance, demonstrating Windsor's commitment to sustainability.

SG36, on the other hand, introduces smart technology with its intuitive touch control panel, allowing users to set operational parameters quickly. This model also features a quiet mode that is perfect for cleaning in noise-sensitive areas without sacrificing performance. The compact design of SG36 enhances maneuverability, making it suitable for tight spaces often found in urban settings.

All these Windsor models are equipped with high-capacity batteries for cordless operation, providing the freedom to clean without being tethered to a power outlet. This feature, coupled with LED indicators that signal battery life, ensures that users can operate with confidence. Maintenance is simplified due to the easily accessible components, meaning downtime for repairs is minimized.

In summary, Windsor SG32, 10052470, 10052450, 10052460, and SG36 boast a range of features aimed at enhancing cleaning efficiency while prioritizing user comfort and sustainability. Each model integrates advanced technologies that cater to various cleaning needs, solidifying Windsor's position as a leader in innovative cleaning solutions.
Top Page Image Contents