Wolf ICBSRT304 E C T R I C a L R E Q U I R E M E N T S, Electrical Shock Hazard

Models: ICBSRT304

1 74
Download 74 pages 47.67 Kb
Page 15
Image 15

I N S TA L L AT I O N I N S T RU C T I O N S

E L E C T R I C A L R E Q U I R E M E N T S

ELECTRICAL SHOCK HAZARD —

Plug into a grounded 3-prong adapter.

Do not remove ground prong.

Do not use an adapter.

Failure to follow these instructions can result in electric shock, fire or death.

IMPORTANT NOTE: If codes permit and a separate ground wire is used, it is recom- mended that a qualified electrician determine that the ground path is adequate.

IMPORTANT NOTE: Check with a qualified electrician if you are not sure whether the sealed rangetop is properly grounded.

IMPORTANT NOTE: Do not ground to a gas pipe.

A220-240 V AC, 50/60 Hz, fused electrical supply is required. A time-delay fuse or circuit breaker is recommended. It is recommended that a separate circuit serving only this appli- ance be provided.

Electronic ignition systems operate within wide voltage limits, but proper ground and polarity are necessary. In addition to checking that the outlet provides 220-240 V AC power and is correctly grounded, the outlet must be checked by a qualified electrician to see if it is wired with correct polarity.

This appliance, when installed, must be electri- cally grounded in accordance with local codes.

RECOMMENDED GROUND METHOD

IMPORTANT NOTE: For your personal safety, this sealed rangetop must be grounded. This sealed rangetop is equipped with a 3-prong ground plug. To minimize possible shock hazard, the cord must be plugged into a mating 3-prong ground-type outlet, grounded in conformance with all local codes and ordi- nances. If a mating outlet is not available, it is the obligation of the customer to have a properly grounded, 3-prong outlet installed by a qualified electrician.

IMPORTANT NOTE: If product is connected to a GFCI protected outlet, nuisance tripping of power supply may occur, resulting in loss of product operation.

WIRING DIAGRAM

The wiring diagram covering the electrical circuit is located on the inside left wall of the rangetop.

15

Page 15
Image 15
Wolf ICBSRT304 installation instructions E C T R I C a L R E Q U I R E M E N T S, Electrical Shock Hazard