Installation Specifications
Failure to locate the multi-function cooktop without the proper clearances will result in a fire hazard.
IMPORTANT NOTE: Installation of the Wolf gas multi- function cooktop must meet minimum clearance require- ments shown in the installation specifications illustration on the following page.
The Wolf multi-function cooktop is intended for indoor use. An adequate supply of fresh air is required to assure proper combustion and ventilation. It is designed to fit a standard 24" (610) deep base cabinet with 25" (635) deep countertop. Before making the countertop cut-out, verify that the module will clear the side walls of the base cabinet.
There should be at least 51/2" (140) clearance between the countertop and any combustible surface directly below the multi-function cooktop.
If the multi-function cooktop is not installed above an oven, the gas service may be supplied through the floor. When an oven is installed below the cooktop, unless you are using cabinets deeper than 24" (610), it is recom- mended that the electrical supply be placed in the base cabinet to the right of the oven. Refer to the illustration on the following page for specifics on placement of the electrical and gas supply.
It is recommended that you use a Wolf cooktop ventilation hood, downdraft, pro hood or hood liner with the multi- function cooktop. Refer to the Wolf design guide.
15" 
