Wolf | 3 |
Multi-Function Cooktop Installation
IMPORTANT NOTE: Installation of the Wolf gas multi- function cooktop must be completed by a qualified installer.
Read this entire installation guide prior to installation and save for the local inspector’s reference. The homeowner should keep this installation guide for future reference.
This appliance must be installed in accordance with National Electrical Codes, as well as all state, municipal and local codes. The correct voltage, frequency and amperage must be supplied to the appliance from a dedi- cated, grounded circuit which is protected by a properly sized circuit breaker or time delay fuse. The proper voltage, frequency and amperage ratings are listed on the product rating plate.
The Wolf
Record the model and serial numbers before installing
the
Wolf
Model Number | IM15/S |
Serial Number
RATING PLATE |
wolfappliance.com/specs
IMPORTANT INSTRUCTIONS
If the information in this guide is not followed exactly, a fire or explosion may result, causing property damage, personal injury or death.
•Installation and service must be performed by a qualified installer, service agency or the gas supplier.
•Warranty service must be performed by Wolf factory certified service.
•Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
•A ventilation hood or downdraft system is recom- mended for use with the
•In Massachusetts: Installations and repairs must be performed by a qualified or licensed contractor, plumber or gasfitter qualified or licensed by the state, province, or region where this appliance is being installed. Only use gas
WHAT TO DO IF YOU SMELL GAS:
•Do not try to light any appliance.
•Do not touch any electrical switch.
•Do not use any phone in your building.
•Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.
•If you cannot reach your gas supplier, call the fire department.
Location of rating plate.