Cooktop Removal
The multi-function cooktop must be disconnected from the electrical and gas supply prior to removal.
IMPORTANT NOTE: Removal of the multi-function cooktop should only be performed by Wolf factory certified service.
If removing the multi-function cooktop is necessary for cleaning or service, shut off the gas supply. Disconnect the electrical and gas supply. Remove the mounting brackets on each side of cooktop and remove. Reinstall in the reverse order and check gas connections for leaks.
wolfappliance.com/specs
Troubleshooting
IMPORTANT NOTE: If the multi-function cooktop does not operate properly, follow these troubleshooting steps:
•Verify that electrical power is being supplied to the cooktop.
•Check the gas supply and electrical connections to ensure that the installation has been completed correctly.
•Check that the gas supply shut-off valve is in the open position.
•Check polarity of the electrical outlet if excessive igniter clicking occurs immediately after installation.
•Follow troubleshooting procedures outlined in the Wolf gas multi-function cooktop use & care guide.
•If the multi-function cooktop still does not operate properly, contact Wolf factory certified service. Do not attempt to repair the cooktop yourself. Wolf is not responsible for service required to correct a faulty installation.
