Wolf Appliance Company IM15 manual Electrical Requirements, Multi-FunctionCooktop Specifications

Multi-Function Cooktop Specifications 8

Electrical Requirements

ELECTRICAL SHOCK HAZARD: Plug into a grounded 3-prong outlet. Do not remove ground prong. Do not use an adapter. Failure to follow these instructions can result in electric shock, fire or death.

The Wolf multi-function cooktop requires a 120 V AC,

60 Hz, 15-amp, fused electrical supply. A time-delay fuse or circuit breaker is recommended. It is recommended that a separate circuit serving only this appliance be provided. A ground fault circuit interrupter (GFCI) is not recom- mended and may cause interruption of operation.

ELECTRICAL GROUND

The 6' (1.8 m) power cord is equipped with a 3-prong, grounding plug for protection against shock hazard. The power cord must be plugged into a mating 3-prong grounded outlet, grounded to conform with the National Electrical Code, ANSI/NFPA 70 latest edition, or Canadian Electrical Code (CSA) and all local codes and ordinances. Refer to the illustration below.

IMPORTANT NOTE: This appliance must be properly grounded to avoid electrical shock hazard. Do not ground to a gas pipe.

IMPORTANT NOTE: Electronic ignition systems operate within wide voltage limits, but proper ground and polarity are necessary. In addition to checking that the electrical outlet provides 120 V AC power and is correctly grounded, the outlet must be checked by a qualified electrician to see if it is wired with correct polarity.

WIRING DIAGRAM

The wiring diagram below covers the control circuit for the Wolf multi-function cooktop.

SPARK		WHITE	3 CONDUCTOR
MODULE
			POWER CORD
N			WHITE
		1	1
A		2	2 BLK
	RED		GRN
		RED
		RED	BLACK
			WHITE
			WHITE
		BLACK

Wiring diagram.

GROUNDING

PLUG

GROUNDED

ELECTRICAL OUTLET

Electrical ground.