Install Wing Wheel Yoke Adjustment Link (BW180HD)

CAUTION

Use a suitable lifting device of sufficient capac- ity. Use adequate personnel to handle heavy com- ponents.

1.With a lifting device raise right wing and lock in the up position using the wing lock-up bar. Leave lifting device attached for added support.

2.Attach adjustable link (8) to right side of center wheel yoke arm and secure with cap screw (28) and lock nut (33).

3.Attach opposite end of adjustable link (8) to wing wheel yoke arm and secure with cap screw (28) and lock nut (33).

4.Remove lock-up bar and carefully lower wing using lifting device.

5.Repeat process for left wing.

8

28

33

DP2

8. Adjustable link

28. 1 NC x 4-1/2 HHCS GR5

33. 1 NC Lock nut

Figure 34. Left Wing Wheel Yoke

Adjustment Link Installed

Install Wing Driveline (BW180HD)

1.Attach clutch shield (16) to wing gearbox using four cap screws (60), lock washers (64), and flat washers (63).

2.Slide non clutch end of driveline (3) over wing gearbox shaft and align holes with groove.

3.Secure driveline to shaft using cap screws and lock nuts supplied with driveline.

4.Slide clutch end of driveline over splitter gearbox and secure using cap screws and lock nuts supplied with driveline.

5.Repeat process for left driveline.

3.Driveline, complete

16.Clutch shield

60.M8 x 1.25P x 20 mm HHCS

63.5/16" Flat washer

64.5/16" Lock washer

Figure 35. Right Driveline Installation

Install Hose Kit (BW180HD)

1.Remove plug from rod end of each wing cylinder.

2.With the wings in the down position and cylinder extended, remove and reinstall the plugs from the base of the wing cylinders. This will trap air behind the piston and help when lowering the wings.

3.Install reducer bushing and restricter elbow into cylinders. Position elbow on center cylinder to point forward; on wing cylinders point elbows to the center.

NOTE: Make sure a breather fitting is installed in the rod end port of the wheel yoke cylinder.

4.Attach hose to each elbow.

Winch Kit Installation (Optional)

Refer to page 71 for Installation and Operation instruc- tions.

(Rev. 10/23/2009) MAN0805 (4/30/2009)

Assembly 39

Page 38 Page 40
Page 39
Image 39
Woods Equipment BW180HB, BW180HDQ manual Install Wing Wheel Yoke Adjustment Link BW180HD, Install Wing Driveline BW180HD
Page 38 Page 40

BW180HDQ, BW180HD, BW180HB specifications

Woods Equipment has long been a leader in the agricultural and landscaping industry, providing exceptional products that enhance productivity and efficiency. Among its standout offerings are the BW180HB, BW180HD, and BW180HDQ models. These versatile implements are primarily designed for use with tractors, making them invaluable for a variety of tasks.

The BW180HB model is known for its high-performance capabilities combined with a compact design. One of its main features is its heavy-duty construction, which ensures durability and longevity even under strenuous conditions. The implement is equipped with a balanced weight distribution system that allows for better stability and control during operation. Additionally, the BW180HB is designed to handle a range of tasks from grading and leveling to scraping and light dozing.

Moving up the series, the BW180HD offers a higher capacity and is built for more demanding applications. This model features a robust hydraulic system that enhances lifting capabilities, allowing operators to tackle heavier loads with ease. Its advanced blade adjustment features allow for precise angle and depth control, making it ideal for a variety of terrains. The BW180HD is particularly praised for its reliability in tough environments, thanks to its reinforced frame and high-quality materials.

The BW180HDQ model represents the pinnacle of Woods Equipment's offerings in this series. It features all the capabilities of the BW180HD but includes advanced technological enhancements for improved performance. The inclusion of an automated hydraulic control system streamlines operations, enabling operators to adjust settings on-the-fly to adapt to changing conditions. Additionally, the BW180HDQ comes with integrated safety features that protect both the operator and the equipment during use.

All three models share several common characteristics that make them preferred choices among landscaping and construction professionals. They are compatible with a wide range of tractor types, ensuring versatility for various users. The quick-connect attachment points allow for rapid changes between implements, saving time and increasing productivity. With easy maintenance designs, these models ensure that downtime is minimized, allowing operators to focus on the task at hand.

In summary, the Woods Equipment BW180HB, BW180HD, and BW180HDQ models are exceptional tools for anyone looking to enhance their operational efficiency in agriculture or landscaping. With their robust features, advanced technologies, and commitment to durability, these implements represent some of the best options available in the market today.
Top Page Image Contents