Woodstock D2057A, D2058A, D2260A Tools Needed for Assembly, Inventory

-3-

D2057A, D2058A, D2260A Mobile Base Instructions

Tools Needed for Assembly

Tape Measure ....................................................1

Wrenches or Sockets 13mm ...................................2

Light Machine Oil (Optional) ......................As Needed

Crowbar (Optional) .............................................1

Rubber Mallet (Optional) ......................................1

6" 2x4's (Optional) ..............................................2

6" 2x6 (Optional) ................................................1

12" 4x4 (Optional) ..............................................1

Inventory (see Figure 6) Qty

A. Swivel Casters ..............................................2

B. Fixed Casters ...............................................2

C. Left Corner Bracket .......................................1

D. Right Corner Bracket ......................................1

E. Right Corner Bracket w/Foot Post ......................1

F. Left Corner Bracket w/Foot Post .......................1

G. Side Rails ...................................................4

H. Knobs M12-1.75 ............................................2

I. Feet ..........................................................2

J. Hardware Bag (not shown)

—Hex Bolts M8-1.25 x 16 (Casters) ...................16

—Hex Bolts M8-1.25 x 25 (Brackets) ..................16

— Lock Nuts M8-1.25 (Brackets) .......................16

— Lock Washers 8mm (Casters) ........................16

— Flat Washers 8mm (Casters) .........................16

— Hex Nuts M8-1.25 (Casters) ..........................16

Figure 6. Inventory.

Do not use the mobile base until

you have read and understood this

instruction sheet and completed the

entire assembly procedure. Serious

personal injury may occur if you ignore

this warning.