M1036 Micro Mill
SET UP
Unpacking
The SHOP FOX® Model M1036 has been carefully pack- aged for safe transporting. If you notice the machine has been damaged, please contact your authorized SHOP FOX® dealer immediately.
SUFFOCATION HAZARD!
Immediately discard all plastic bags and packing materials to eliminate suffoca- tion hazards for children and animals.
Items Needed for Set Up
The following items are needed, but not included, to setup your machine:
• Safety Glasses (for each person) | 1 | |
• | Solvent | 1 |
• | Shop Rags | 1 |
• Wrench or Socket 10mm | 1 | |
• | Ruler | 1 |
Bench Mounting Hardware (Optional) |
| |
• | Precision Level | 1 |
• Phillips Head Screw 6mm x Length Varies | 2 | |
• | Hex Nut 6mm | 2 |
• | Flat Washer 6mm | 2 |
• | Metal Shim Stock | 1 |
• Drill and 6mm Bit | 1 | |
READ and understand this entire instruction manual before using this machine. Serious personal injury may occur if safety and operational information is not understood and fol- lowed. DO NOT risk your safety by not reading!
UNPLUG power cord before you do any assem- bly or adjustment tasks! Otherwise, serious per- sonal injury to you or others may occur!
SET UP
