M1113 18" Wood/Metal Bandsaw

Machine Placement

Cleaning Machine

Floor Load: This machine distributes a heavy load in a small footprint. Some residential floors may require additional bracing to support both machine, operator, and material to be processed.

Working Clearances: Consider existing and anticipated needs, size of material to be processed through the machine, and space for auxiliary stands, work tables or other machinery when establishing a location for your bandsaw. Refer to Figure 4.

Lighting: Lighting should be bright enough to eliminate shadow and prevent eye strain.

Electrical: Place the machine near a power source to avoid long runs of power cords strung across your shop. Refer to the Electrical section on Page 9 for information on minimum circuit requirements.

The table and other unpainted parts of your machine type are coated with a waxy grease that protects them from corrosion during ship- ment. Clean this grease off with a solvent clean- er or citrus-based degreaser. DO NOT use chlo- rine-based solvents such as brake parts cleaner or acetone—if you happen to splash some onto a painted surface, you will ruin the finish.

NEVER clean with gasoline or other petroleum- based solvents. Most have low flash points, which make them extremely flammable. A risk of explosion and burning exists if these products are used. Serious personal injury may occur if this warning is ignored!

SETUP

���

�������

Figure 4. Model M1113 working clearances.

-11-

Page 13
Image 13
Woodstock M1113 owner manual Machine Placement, Cleaning Machine