ASSEMBLY INSTRUCTIONS
ASSEMBLY
Unpacking
The Model W1679 has been carefully packaged for safe transporting. If you notice the machine has been damaged or is missing any parts, please contact Woodstock International Service and Support at
Box Contents
The following is a description of the components shipped with the Shop Fox® W1679. It is recom- mended that the components be laid out in a similar fashion to those in Figure 9. This will help in identification before beginning assem- bly. Should any part be missing, examine the packaging carefully. If any key parts are missing, find the part number in the back of this manual and call Woodstock International, Inc. at 360-
Read and understand this entire instruction manual before performing any operations with your machine. Otherwise, seri- ous personal injury may occur if safety and opera- tional information is not understood and followed. Do not risk your safety by not reading!
Seek lifting assistance before beginning assem- bly. The Model W1679 is a heavy load at 235 pounds.
| Item | Qty. |
1. | Cabinet Stand | 1 |
2. | Table Assembly | 1 |
3. | Fence Assembly | 1 |
4. | Push Blocks | 2 |
5. | Cutterhead Guard | 1 |
6. | Fence Support Key | 1 |
7. | Dust Port | 1 |
8. | Fence Tilt Knob | 1 |
9. | Lock Knob | 1 |
| Special Nut | 1 |
| Flat Washer 1⁄2" | 1 |
7
3
5
4
11
1
2
12
10
10. | 1 | |
11. | Belt Cover | 1 |
12. | Hardware Bags: |
|
6
8
9
Hex Bolts | 3 |
Lock Washers 3⁄8" | 3 |
Hex Nuts | 4 |
Hex Washers 5⁄16" | 8 |
Phillps Head Screws | 4 |
Knife Setting Gauge Kit | 1 |
