ADJUSTMENTS
-18-
To adjust the 45˚ inward angle stop bolt, do
these steps:
1. Slide the 90˚ stop slide away from the back
of the fence.
2. Using a 45˚ square, position the fence 45˚
relative to the table surface.
3. Loosen the jam nut on the 45˚ inward stop
bolt (Figure 23).
4. Adjust the 45˚ inward stop bolt until it
makes contact with the back of the fence.
5. Retighten the jam nut loosened in step 3.
To adjust the 45˚ outward angle stop bolt, do
these steps:
1. Using a sliding bevel adjusted to 135˚, posi-
tion the fence 135˚ (45˚ outward) relative
to the table surface.
2. Loosen the jam nut on the 45˚ outward stop
bolt (Figure 24).
3. Adjust the 45˚ outward stop bolt until it
makes contact with the fence adjusting
bracket.
4. Retighten the jam nut loosened in step 2.
Figure 23. 45˚ inward angle stop bolt.
Figure 24. 45˚ outward angle stop bolt.