Woodstock W1819/W1820 manual Xf9cX\jsee =`li\+*1, `eB\i9cX, =`li\+*%Stacked dado blade

Df[\cN(/(0&N(/)'D]^%J`eZ\()&('

FG<I8K@FEJ

;X[f9cX[\j(see =`^li\+*)1

There are two types of dado blades: stacked and wobble.

•JkXZb\[;X[f9cX[\: These dedicated dado cutting blade sets consist of up to 8 individual blades. Multiple cutters are "stacked" between two outside blades. The width of the dado is determined by the combination of cutters that are “stacked” together. The dado is cut in a single pass leaving a smooth and square channel in the face of the workpiece. Stacked dado blades are the most expensive option, but are worth considering if your projects require a lot of visible dado cuts. A stacked dado blade is shown in

=`^li\+*.

•NfYYc\;X[f9cX[\: Also a dedicated dado blade, a wobble blade usually consists of a single blade that is tilted on the arbor shaft while it is spinning. The channel is cut in the face of the workpiece as the blade passes through its pre-adjusted width of

travel. Wobble blades are an inexpensive option when visibly pleasing channels are not a concern.



K_`eB\i]9cX[\

A blade with a kerf or thickness that is thinner than a standard blade. Since thin kerf blades are typically the same thickness of the spreader or riving knife—and in some cases thinner—we DO NOT recommend that they be used on this saw due to the increased risk of kickback. The acceptable kerf range is 0.102"– 0.126" (2.6mm–3.2mm).

Efk\1K_`jj\Zk`fefeYcX[\j\c\Zk`fe`jYpef d\XejZfdgi\_\ej`m\%8cnXpj]fccfnk_\jXnYcX[\ dXel]XZkli\iji\Zfdd\e[Xk`fejkf\ejli\jX]\Xe[ \]]`Z`\ekfg\iXk`fef]pflikXYc\jXn%

=`^li\+*%Stacked dado blade.

-34-