Woodstock W1819/W1820 manual =c`gJkfg, 9cX\K`ck 9\m\clkj, =`li\ ,,. Flip stop lock lever

Df[\cN(/(0&N(/)'D]^%J`eZ\()&('

=c`gJkfg

The flip stop can be positioned anywhere along the top of the miter fence and secured in place with a lock lever

(see =`^li\,,), the same distance away from the bladeLock Lever as your desired width of cut.

The flip stop can be used in the down position to make multiple cuts of the same width. It can be pivoted (hence the name “flip”) out of the way to allow longer workpieces to be cut, then pivoted back down to make additional cuts at the specified cutting width.

=`^li\ ,,. Flip stop lock lever.

9cX[\K`ck9\m\c:lkj

When the blade tilt stop bolts are properly adjusted, as described on GX^\-,, the blade tilt handwheel allows the operator to tilt the blade to the left, anywhere between 0° and 45°. This is used most often when cutting bevels or compound miters. =`^li\,- shows an example of the blade when tilted to 45°.

=`^li\,-. Blade tilted to 45° for bevel

cutting on a typical table saw.

-43-

FG<I8K@FEJ