Page: 10 Model BXAUDIO4X4
© 2005 Xantech Corporation
SECTION 3.0: BXAUDIO4X4 LC4KP KEYPAD FEATURE DESCRIPTIONS
30 31
32
33
34 36 37
35 38
39
40
42
43
44 41
42
Figure 4 –Model LC4KP Keypad – Front Panel Features and Functions
30. BXAUDIO4X4 Keypad.
31. Power. Turns the zone ON and OFF. Can be programmed with IR codes or sequences.
32. IR Sensor. Receives IR from hand-held remotes to control both source components and the
BXAUDIO4X4 system. A Programmable Learning Remote such as the Xantech URC2 is recommended
for integrating the IR commands of the BXAUDIO4X4 and source components into a single controller.
Compatible with most brands of remote controls, though some may not be programmable and will
therefore only control the source components.
33. Status Indicator LED. Will indicate zone/system status and will flash as IR is received at the IR
Sensor. These indicators, one for each Keypad, provide the following Information:
a. Off=Zone OFF
b. Steady Green=Zone ON
c. Flash Green=Zone MUTE
d. Flash Red=IR Sensor INPUT or Keypad OUTPUT
e. Flash Amber=System BUSY
34. Source Legend Display. Configurable Source Display. Use included label program to print out custom
source labels.
35. Source 1 Selector. Selects source input 1 sends IR commands programmed to this button (if any) to
the source 1 and common emitter outputs.
36. Source 2 Selector. Selects source input 2 sends IR commands programmed to this button (if any) to
the source 2 and common emitter outputs.
37. Source 3 Selector. Selects source input 3 sends IR commands programmed to this button (if any) to
the source 3 and common emitter outputs.
38. Source 4 Selector. Selects source input 4 sends IR commands programmed to this button (if any) to
the source 4 and common emitter outputs.