Xantech BXAUDIO4X4 installation instructions Specifications, IR Sensor, General

Model BXAUDIO4X4 Page: 33

SECTION 9.0: SPECIFICATIONS

Audio (ea channel)
Gain (@ max VC):
Input Overload:	>2.2 V RMS (@ max VC)
Input Impedance:	> 20 k Ohms
Power Output:	25 Watts RMS @ 4-8 Ohms
Signal to Noise:	>96dB A-weighted
THD (VC –10dB):	<0.08% at 2V input level
Frequency Response (± 3dB):	12 Hz to 55 kHz
Bass Control Range (@ 100Hz):	±14dB (in 2 dB steps)
Treble Control Range (@ 10kHz):	±14dB (in 2 dB steps)
IR Sensor
IR Modulation Frequency Bandwidth:	...........................................................................30 Hz to 100 kHz
Nominal Reception Range:	>30 feet
Nominal Reception Angle:	40 degrees off axis
General
RC68 Code Group Number:	A8
Control Output:	12 V @ 50 mA
Status Output:	12 V @ 50 mA
Power Requirements:	120 VAC, 60 Hz, 660 Watts max,
	TMRA 30° Celsius - If this temperature is exceeded, you will need
	to provide additional ventilation to insure proper operation.
Gold Plated RCA type phono jacks	All Audio inputs
Dimensions (Controller)	17” W x 4” H x 11.5” D (432mm x 102mm x 292mm)
Dimensions (Keypad):	5.0” W x 5.0” H x 1.5” D (127mm x 127mm x 38mm)
Weight (Controller):	22.75 lbs (10.3 kg)
Weight (Keypad):	0.6 lbs (0.3 kg)

© 2005 Xantech Corporation