Operation
Freedom 10 Power Switch
The power switch is located on the front panel of the Freedom 10. This switch controls ON/OFF and RESET for the inverter. Expect a
If installed with the remote control panel, the power switch on the unit itself should be left in the OFF position.
If the unit is connected to external AC power, the power switch may be turned off, but the battery charger will continue to function. The internal transfer switch will continue to be engaged with the switch off and AC power will be available at the output of the unit. If AC power is removed, the unit will not come on as an inverter.
Figure 3-1 Freedom 10 Power Switch
Important: The power switch controls the inverter function. Placing the switch in the OFF position disables the inverter and connects mains to the output.
Remote Control Panel
12 V Models
The remote control panel provides LED bar graphs that show system status, battery voltage, and current in both inverter and charge modes. For more information about this remote, refer to its owner’s manual.
