Important Safety Instructions
WARNING
This chapter contains important safety and operating instructions. Read and keep this
Owner’s Manual for future reference.
Important: General safety information for installation and operation is contained throughout this manual where they apply and are not included In this summary.
1.Before installing and using the Freedom 10 Inverter/Charger, read all instructions and cautionary markings on the Freedom 10 Inverter/Charger, the batteries, and all appropriate sections of this guide.
2.For continued protection against the possibility of fire, replace the fuse only with a fuse of the specified voltage, current, and type ratings.
3.To avoid damage, operate the equipment only within the specified AC (mains) and DC (battery) voltages.
4.Do not expose the Freedom 10 Inverter/Charger to rain, snow, spray, or bilge water. To reduce risk of fire hazard, do not cover or obstruct the ventilation openings. Do not install the Freedom 10 Inverter/Charger in a
5.Use only attachments recommended or sold by the manufacturer. Doing otherwise may result in a risk of fire, electric shock, or injury to persons.
6.To avoid a risk of fire and electric shock, make sure that existing wiring is in good condition and that wire is not undersized. Do not operate the Freedom 10 Inverter/Charger with damaged or substandard wiring.
7.Do not operate the Freedom 10 Inverter/Charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. If the Freedom 10 Inverter/Charger is damaged, see the Warranty section.
8.Do not disassemble the Freedom 10 Inverter/Charger. It contains no user- serviceable parts. See Warranty for instructions on obtaining service. Attempting to service the Freedom 10 Inverter/Charger yourself may result in a risk of electrical shock or fire. Internal capacitors remain charged after all power is disconnected.
9.To reduce the risk of electrical shock, disconnect both AC and DC power from the Freedom 10 Inverter/Charger before attempting any maintenance or cleaning or working on any circuits connected to the Freedom 10 Inverter/ Charger. Turning off controls will not reduce this risk.
10.The Freedom 10 Inverter/Charger must be provided with an equipment- grounding conductor connected to the AC input ground.
v |
