INTRODUCTION
This owner's manual describes the Fleet Power Inverter/Chargers from Heart Interface. These units perform three distinct functions:
1.DC to AC power inverting.
2.Automatic transfer switching between inverter power and incoming AC power.
3.Automatic
4.AC to DC power converter.
•The inverters provide regulated 120 Volt AC power and crystal controlled frequency at 60Hz from a deep cycle battery bank in specified watts:
FP | 1000 watts |
FP | 2000 watts |
FP | 2500 watts |
The output is a modified sinewave and is compatible with appliances, tools and other 120 VAC equipment. Momentary surge power of three times the inverter rating is available for starting electric mo- tors. High efficiency insures the longest possible battery life between recharges.
•The transfer switch allows the Fleet Power Inverter/Chargers to be connected to an external AC source and transfer the source through to the loads. When disconnected, the transfer switch allows automatic switch- ing back to the inverter.
Fleet Power Inverter/Chargers operate as
•Fleet Power battery chargers are electroni- cally controlled and rated:
FP | 50 | Amps DC |
FP | 100 | Amps DC |
FP | 130 | Amps DC |
They are designed to rapidly and optimally recharge either wet* or gel* cell
With an external AC source connected, the Fleet Power charger also serves the functions of a AC to DC converter to supply all of the DC loads which are connected to the battery.
Simple, automatic operation is made possible by the microprocessor in the Fleet Power Inverter/Chargers. In most cases, the unit is left on and no attention or mainte- nance is required.
*Adustable with optional remote
4
10/97 Fltman.pm65