Xantrex Technology 300 PLUS Operating an AC Appliance, To operate an AC appliance:

Operating AC Appliances

inverter’s safety overload shutdown circuit. See “Troubleshooting Reference” on page 36 for the reset procedure.

Trouble Appliances

Some appliances may be damaged if they are connected to the XPower Powerpack. See “Precautions for Using Rechargeable Appliances” on page viii.

Operating Several Appliances at Once

You can run several AC appliances if the total rating of all the appliances (in watts) does not exceed 250 watts. You can run appliances using an AC power bar.

Run time, however, will decrease accordingly with the number of appliances being operated and the AC power being consumed.

Operating an AC Appliance

Before operating your AC appliance, ensure that the battery of the XPower Powerpack is fully charged. See “Recharging with the AC Charger” on page 13 for details.

To operate an AC appliance:

1.Open the protective covering on the right side of the XPower Powerpack. Turn the AC Outlet On/Off switch to the On position.

The switch illuminates to indicate AC power is available at the AC Outlet.

2.Plug the AC appliance into the AC Outlet and turn the appliance on. XPower Powerpack will operate most devices rated up to 250 watts.

3.Recharge the XPower Powerpack as soon as possible after each use.

16