Connecting to an External Battery

The Battery Clips Connected Properly (green light) illuminates. You can now use the XPower Powerpack.

OR

The reverse polarity alarm sounds and the Battery Clips Connected Improperly (red light) illuminates, go to Step 4.

4.Remove the red positive (+) clip first, and then the black negative clip (–) to cancel the alarm.

5.Repeat steps 2 and 3.

WARNING: Sparking and Explosion

Do not remove the jump-start cables from the jumper cable port when the positive and negative clips are connected to the terminals of the external battery. Removing the jump-start cable from the jumper-cable port while they are connected to the vehicle’s battery terminals will disable the jump-start safety feature and could result in sparking or explosion.

To disconnect the jump-start cables from an external battery and from the XPower Powerpack:

1.To disconnect the XPower Powerpack from the external battery when the external battery is discharged or no longer needed, remove the red positive (+) clip, and then remove the black negative (–) clip.

2.Remove the jump-start cables from the Jumper Cable Port.

3.Recharge the XPower Powerpack as soon as possible after use.

24