Replacing the Fluorescent Tubes
6.Do not overtighten the nut and bolt. Consult the battery manufacturer for torque specifications.
7.On the XPower Powerpack 300, replace the battery cover and the four fasteners.
On the XPower Powerpack 300 Plus, replace the compressor unit and the four fasteners.
8.Dispose of the old battery in an environmentally responsible manner.
Replacing the Fluorescent Tubes
To replace a fluorescent tube:1.Turn the light switch off.
2.Remove the clear cover by grasping it on each side at the top and pulling the top of the cover away from the unit.
3.Gently grasp the fluorescent tube and rotate ¼ turn to remove it.
4.Insert the replacement tube and rotate ¼ turn to lock the tube in place.
5.Reattach the clear cover.
Replacing the External Fuse
The replacement fuse is a 40 amp 32 VDC car fuse which can be purchased at any automotive shop. To replace the external fuse:
1.Open the protective cover on the right side of the unit.
2.Remove the fuse.
3.Insert the replacement fuse. Ensure the replacement fuse is rated at 40 amps.
34