Operating Modes
975-0004-01-02 Rev D 3
• Indoor-type, powder-coated enclosure, for wall
mounting.
• Conformal-coated circuit boards, plated terminals,
powder-coated metal components, and stainless steel
fasteners improves tolerance to hostile environments.
• Meets National Electrical Code (NEC) and other
international controller specificatio ns .
• The C35, C40 and C60 models are UL listed to the
U.S. UL Standard 1741 (1st edition), and Canada
(CSA-C22.2 No. 107.1-95).
• 2-year limited warranty.
Operating Modes
The DC controller is a critical component in any solar, wind
or hydro power generation system and protects the batteries
from over-discharge and over-charge conditions. The
C-Series has two operating modes (Charge Control mode and
Load Control mode determined by the Operating mode
jumper (See Figure 2-5). These two different operating
modes allow the C-Series to be installed and funct ion as three
different DC controllers.
• Charge Contr ol Mode
•PV Charge Controller - controls charging in PV
installations.
•Diversion Controller – used in PV, wind, or hydro
installations to divert any excess energy to a diversion
load and in the case of a wind or hydro generator, helps
to prevent over-spin damage.
• Load Control Mode
•Load Controller - prevents damage to the battery from
over-discharge during periods of poor charging or
excessive loads.