Introduction

Important: If PV arrays are used with diversion control, it may be necessary to install diodes to prevent night-time back-feed. If in doubt, contact or consult with your local renewable energy expert.

Important: If using multiple RE sources, use diodes/isolation to prevent backfeed.

CAUTION: Damage to Batteries

Current draw of the diversion load is very important. Problems may arise from operating with a load that is too small or too large. A diversion load that is too small will not be able to absorb all the excess power from the current source once the batteries are full allowing batteries to overcharge.

Diversion loads in excess of the controller’s rating are capable of absorbing more power than the C-Series controller is designed to handle, resulting in an over-current shut down. During this time, the unit will not regulate electrical flow in the system and battery damage may result.

Load Controller

The C-Series controller can operate as a Low Voltage Disconnect (LVD) for DC loads to prevent over-discharge to batteries during periods of poor charging or excessive loads. The C-Series controller uses the user-adjustable setpoints to determine when to disconnect or reconnect loads depending on battery voltage.

When used as a DC load controller, the settings of the LVR and LVD are controlled by two rotary potentiometers (also called pots) on the circuit board.

The scale on the adjustment potentiometers differ from the scale used for other functions. A decal with the appropriate adjustment scale is included with the C-Series. To apply the decal, gently pull off the knobs of the potentiometers and place this decal on the circuit board. After the decal is in place, replace the knobs. The EQ jumper determines manual

10

975-0004-01-02 Rev D

Page 29 Page 31
Page 30
Image 30
Xantrex Technology C35, C40, C60 owner manual Load Controller
Page 29 Page 31

C35, C60, C40 specifications

Xantrex Technology is a renowned name in the field of renewable energy solutions, particularly known for its robust line of solar charge controllers. Among its flagship products are the C-Series models: C40, C60, and C35. These charge controllers are specifically designed to optimize the use of solar panels, ensuring efficient energy conversion and battery management for off-grid renewable energy systems.

The C40 model stands out with its impressive 40-amp rating, making it suitable for larger solar installations. It features advanced microprocessor technology, enabling precise control over battery charging and discharging processes. This model supports multiple battery types, including flooded lead-acid, gel, and sealed batteries, allowing users to customize their energy systems according to their specific requirements. One of the key characteristics of the C40 is its easy-to-read LCD display, which provides real-time information on system performance, battery voltage, and charging status.

Moving to the C60, this model offers a higher capacity, rated at 60 amps. The C60 is designed for larger applications, such as RVs, boats, and remote cabins, where higher power requirements are common. It shares many features with the C40 but is equipped with additional capabilities to enhance its versatility. One notable characteristic is the built-in load control, which allows users to manage power distribution to connected devices intelligently. The C60 also incorporates a temperature sensor that adjusts charging parameters according to the battery’s temperature, protecting it from overcharging and extending its lifespan.

The C35, while a bit smaller with a 35-amp rating, is designed to cater to medium-sized applications. It offers similar functionalities as its counterparts, including support for multiple battery types and an intuitive LCD display. The C35 is an ideal solution for homeowners and small businesses looking for reliable performance without the need for extensive power management.

All three models feature a durable design, built to withstand the rigors of outdoor use. With a focus on user-friendly operation, these charge controllers come equipped with straightforward installation processes, making them accessible to both seasoned professionals and newcomers to solar energy. Additionally, their capability to integrate with various solar panel systems makes them a flexible choice for diverse renewable energy applications. With Xantrex’s C-Series charge controllers, users can reap the benefits of solar energy while ensuring their battery systems remain healthy and efficient.
Top Page Image Contents