Operation

Equalization Mode Indication (Red/green)

Be sure to read all cautions and warning regarding equalization charging batteries BEFORE allowing an equalization charge to occur. Damage to batteries can occur.

Alternating Red and Green

The controller is in the EQUALIZE mode.

It will automatically stop the equalization process after accumulating two hours of operation at a voltage above the BULK setting.

The user can manually stop the equalization process at any time by pressing the reset switch until the status LED stops alternating red and green.

Load Control Indications (Red)

The flashing rate of the LED indicates the controller’s stage of operation and approximate battery voltage.

Blinking Red

As battery voltage approaches the LVD setting, the LED will blink red several times (up to five) and then pause providing an indication of battery voltage. Refer to Table 3-1to determine the battery voltage.

Solid Red

The controller is in the Load Control mode and the battery voltage has reached the Low Voltage Disconnect (LVD) setting. After a 6-minute delay, DC loads will be disconnected unless the user reduces the loads to a point that the battery voltage exceeds the LVD setting.

58

975-0004-01-02 Rev D

Page 78
Image 78
Xantrex Technology C35, C40 Load Control Indications Red, Equalization Mode Indication Red/green, Blinking Red, Solid Red

C35, C60, C40 specifications

Xantrex Technology is a renowned name in the field of renewable energy solutions, particularly known for its robust line of solar charge controllers. Among its flagship products are the C-Series models: C40, C60, and C35. These charge controllers are specifically designed to optimize the use of solar panels, ensuring efficient energy conversion and battery management for off-grid renewable energy systems.

The C40 model stands out with its impressive 40-amp rating, making it suitable for larger solar installations. It features advanced microprocessor technology, enabling precise control over battery charging and discharging processes. This model supports multiple battery types, including flooded lead-acid, gel, and sealed batteries, allowing users to customize their energy systems according to their specific requirements. One of the key characteristics of the C40 is its easy-to-read LCD display, which provides real-time information on system performance, battery voltage, and charging status.

Moving to the C60, this model offers a higher capacity, rated at 60 amps. The C60 is designed for larger applications, such as RVs, boats, and remote cabins, where higher power requirements are common. It shares many features with the C40 but is equipped with additional capabilities to enhance its versatility. One notable characteristic is the built-in load control, which allows users to manage power distribution to connected devices intelligently. The C60 also incorporates a temperature sensor that adjusts charging parameters according to the battery’s temperature, protecting it from overcharging and extending its lifespan.

The C35, while a bit smaller with a 35-amp rating, is designed to cater to medium-sized applications. It offers similar functionalities as its counterparts, including support for multiple battery types and an intuitive LCD display. The C35 is an ideal solution for homeowners and small businesses looking for reliable performance without the need for extensive power management.

All three models feature a durable design, built to withstand the rigors of outdoor use. With a focus on user-friendly operation, these charge controllers come equipped with straightforward installation processes, making them accessible to both seasoned professionals and newcomers to solar energy. Additionally, their capability to integrate with various solar panel systems makes them a flexible choice for diverse renewable energy applications. With Xantrex’s C-Series charge controllers, users can reap the benefits of solar energy while ensuring their battery systems remain healthy and efficient.