Installation
14 975-0004-01-02 Rev D
Pre-Installation
The instructions that follow are applicabl e to the typic al
installation. For special applications, consult a qualified
electrician or your Xantrex Certified Dealer. Installation
procedures will vary according to your speci fic ap p lic at ion.
Removing the Top Cover
Access the inside of the controller by removing the four
phillips screws (#10-32 x 3/8" SMS screws) on the front
cover of the unit.
Removing Knockouts
Six dual-knockouts are provided to accommodate the
necessary wiring of the C-Series controller. Be sure to
remove any metal shavings created by removing the
Important:
Installations should meet all local codes and
standards. Installations of this equipm ent should only be
performed by skilled personnel such as qualified electricians and
Certified Renewabl e En ergy (R E ) Sys t em Installers. For a list of
Xantrex Certified RE dealers, please visit our website at
www.XantrexREdealers.com.
Figure 2-1
Removing the Front Cover
Remove these
phillips screws (x4 )
from the front cover
to access the inside
of the controller.