AC Input Power
TM-XDOP-01XN 2–7
AC Input Power
AC Input Connector
The AC input connector is a standard wire clamp terminal block with 3-phase
connectors and a chassis ground connector. The safety ground wire, alternatively,
may be connected to the chassis using a ring tongue on the ground stud as shown
in Figure 2-4 and Figure 2-6.
WARNING
Disconnect AC power from the unit before removing the connector cover. Live
line voltages may be exposed when the cover is removed.
WARNING
A safety ground wire must be connected to the unit as shown in Figure 2-4 and
Figure 2-6 to ensure operator safety
CAUTION
When the power switch is turned on, output voltage or current previously set may
be applied to loads, depending on the supply configuration.
Figure 2-4
AC Input Connector for 6000 Watt units
Ground Connection
3-Phase Terminal Block Connectors
TM-XDOP-01XN.book Page 7 Monday, July 17, 2006 11:19 AM