Xantrex Technology Table A-3, Specifications for 12000 Watt units (10V to 60V Models)

Specifications and Characteristics
A–4 TM-XDOP-01XN
Table A-3 Specifications for 12000 Watt units (10V to 60V Models)
Models 10-1200 20-600 30-400 40-300 60-200
Output Ratings:
Output Voltage a
Output Current b
Output Power
a. Minimum output voltage is <0.3% of rated voltage at zero output setting.
b. Minimum output current is <0.2% of rated current at zero output setting when measured with rated load resistance.
0–10 V
0–1200 A
12000 W
0–20 V
0–600 A
12000 W
0–30 V
0–400 A
12000 W
0–40 V
0–300 A
12000 W
0–60 V
0–200 A
12000 W
Line Regulation: c
Voltage (0.01% of Vmax)
Current (0.1% of Imax)
c. For input voltage variation over the AC input voltage range, with constant rated load.
1mV
1200 mA 2mV 600mA 3mV 400mA 4mV 300mA 6mV 200mA
Load Regulation: d
Voltage (0.05% of Vmax + 5mV)
Current (0.2% of Imax + 40 mA)
d. For 0–100% load variation, with constant nominal line voltage.
10mV
2440 mA 15mV 1240 mA 20mV 840mA 25mV 640mA 35mV 440mA
Meter Accuracy:
Voltage (0.15% of Vmax)
Current (0.5% of Imax) 15mV 6A 30mV 3A 45mV 2.0A 60mV 1.5A 90mV 1A
Output Noise (0–20 MHz):
Voltage (p–p) 75mV 75mV 75mV 75mV 100mV
Output Ripple (rms):
Voltage
Current e
e. Current mode noise is measured from 10% to 100% of rated output voltage, full current, unit in CC mode.
10mV
6200 mA 10mV 3200 mA 12mV 2000 mA 15mV 1500 mA 15mV 900mA
OVP Adjustment Range:
(0% to 103% of Vmax) 0–10.3 V 0–20.6 V 0–30.9 V 0–41.2 V 0–61.8 V
Efficiency: f
f. Typical efficiency at nominal input voltage and full output power.
0.85 0.87 0.87 0.87 0.89
Drift (30 minutes): g
Voltage (0.04% of Vmax)
Current (0.6% of Imax)
g. Maximum drift over 30 minutes with constant line, load, and temperature, after power on.
4mV
7200 mA 8mV 3600 mA 12mV 2400 mA 16mV 1800 mA 24mV 1200 mA
Drift (8 hours): h
Voltage (0.02% of Vmax)
Current (0.05% of Imax)
h. Maximum drift over 8 hours with constant line, load, and temperature, after 30 minute warm-up.
2mV
600mA 4mV 300mA 6mV 200mA 8mV 150mA 12mV 100mA
Temperature Coefficient: i
Voltage (0.04% of Vmax/°C)
Current (0.06% of Imax/°C)
i. Change in output per °C change in ambient temperature, with constant line and load.
4mV
720mA 8mV 360mA 12mV 240mA 16mV 180mA 24mV 120mA
TM-XDOP-01XN.book Page 4 Monday, July 17, 2006 11:19 AM