Xantrex Technology Table A-2, Specifications for 6000 Watt units (80V to 600V Models)

Electrical Specifications—Summary
TM-XDOP-01XN A–3
)
Table A-2 Specifications for 6000 Watt units (80V to 600V Models)
Models 80–75 100–60 150–40 300–20 600–10
Output Ratings:
Output Voltage a
Output Current b
Output Power
a. Minimum output voltage is <0.3% of rated voltage at zero output setting.
b. Minimum output current is <0.2% of rated current at zero output setting when measured with rated load resistance.
0–80 V
0–75 A
6000 W
0–100 V
0–60 A
6000 W
0–150 V
0–40 A
6000 W
0–300 V
0–20 A
6000 W
0–600 V
0–10 A
6000 W
Line Regulation: c
Voltage (0.01% of Vmax)
Current (0.05% of Imax)
c. For input voltage variation over the AC input voltage range, with constant rated load.
8mV
37.5 mA 10 mV 30 mA 15 mV 20mA 30 mV 10mA 60 mV 5mA
Load Regulation: d
Voltage (0.05% of Vmax + 5mV)
Current (0.1% of Imax + 20 mA)
d. For 0–100% load variation, with constant nominal line voltage.
45 mV
95 mA 55mV 80 mA 80mV 60mA 155 mV 40mA 305 mV 30mA
Meter Accuracy:
Voltage (0.15% of Vmax)
Current (0.5% of Imax) 120 mV 375 mA 150 mV 300 mA 225 mV 200mA 450mV 100mA 900mV 50mA
Output Noise (0–20 MHz):
Voltage (p–p) 100 mV 100 mV 150 mV 250mV 350mV
Output Ripple (rms):
Voltage
Current e
e. Current mode noise is measured from 10% to 100% of rated output voltage, full current, unit in CC mode.
15 mV
320 mA 20 mV 230 mA 20 mV 120mA 30mV 50mA 80 mV 25mA
OVP Adjustment Range:
(0% to 103% of Vmax) 0–82.4 V 0–103V 0–154.5 V 0–309 V 0–618 V
Efficiency: f
f. Typical efficiency at nominal input voltage and full output power.
0.89 0.90 0.90 0.91 0.91
Drift (30 minutes): g
Voltage (0.04% of Vmax)
Current (0.6% of Imax)
g. Maximum drift over 30 minutes with constant line, load, and temperature, after power on.
32 mV
450 mA 40 mV 360 mA 60 mV 240mA 120mV 120mA 240mV 60mA
Drift (8 hours): h
Voltage (0.02% of Vmax)
Current (0.04% of Imax)
h. Maximum drift over 8 hours with constant line, load, and temperature, after 30 minute warm-up.
16 mV
30 mA 20mV 24 mA 30mV 16mA 60 mV 8mA 120mV 4mA
Temperature Coefficient: i
Voltage (0.04% of Vmax/°C)
Current (0.06% of Imax/°C)
i. Change in output per °C change in ambient temperature, with constant line and load.
32 mV
45 mA 40mV 36 mA 60mV 24mA 120 mV 12mA 240 mV 6mA
TM-XDOP-01XN.book Page 3 Monday, July 17, 2006 11:19 AM