Xerox 07W & -11W, 05W manual Session Configuration, Startup Command Group To Action, 11-13, Windows

Initialization Commands

Session Configuration

Startup Command Group To Action

Initialization File: Not applicable

Command Line: -nname

Default Setting: Windows 3.1x: tt*w (* is either 05, 07, or 11)

Windows 95 & NT: default

You can specify more than one set of startup commands in the Windows 3.1x WIN.INI file or the Windows 95 or NT TT*W.INI private profile file. This enables you to configure each instance of TeemTalk differently.

Windows 3.1x

The heading of the command group to action for a specific instance of TeemTalk is specified on the command line using the -ncommand line option. For example, if the group of TeemTalk-07W commands was headed [window1] in the WIN.INI file, the command for actioning this set of commands instead of the default [tt07w] set would be:

-nwindow1

When entering groups of TeemTalk commands in the WIN.INI file, make sure that each heading is unique and not duplicated elsewhere in the file.

Windows 95 & NT

Each set of commands other than the default set must have the following heading in the TT*W.INI private profile file:

[startup,name]

where name can be any unique identifying name. You can specify which set of startup commands TeemTalk is to use by including the following on the command line for loading TeemTalk, where name is substituted with the actual name of the startup group required:

-nname

If this command is not present then TeemTalk will use the startup commands under the [startup,default] heading.

11-13