Xerox 07W & -11W, 05W manual Getting Started

Getting Started

The soft buttons can be removed from the display by unchecking the Visible check box in the Soft Buttons dialog box.

The soft buttons can be detached as a separate window by deselecting the Attached option in the Soft Buttons dialog box.

If you close the Soft Buttons window, you can display it again by selecting the Soft Buttons option in the Settings menu, checking the Visible check box, then clicking

OK.

The current position and size of the Soft Buttons window can be saved so that it is displayed the same way the next time TeemTalk is loaded. To do this, select the Save Session As option in the File menu, make sure the Soft Buttons option is checked in the resulting dialog box, then click OK.

By default, the buttons displayed on level 1 are predefined with functions supported by the Tektronix 4105 or 4207 and 4111 terminals as follows:

GErase This will erase the contents of the graphics area and redraw all visible segments.

DErase This will erase all the text contained in the dialog area buffer. DVisib This will toggle the visibility of the dialog area on and off.

Cancel This will halt terminal activity by resetting bypass, Gin, marker, prompt, snoopy, and vector modes.

Setup This will toggle the Tektronix form of setup called Primary Setup on and off. An asterisk prompt indicates that you are in Primary Setup mode. (Primary Setup can also be toggled on and off by pressing the keys Alt + Z together.) Refer to the Primary Setup Mode section earlier in this chapter for more details.

Zoom (Not supported by TeemTalk-05W.) This will activate the zoom/pan feature. When the pointer is moved into the emulation workspace it will change into the zoom cursor, which appears as a two-way arrow. Click the left mouse button to select that location as the centre of the area to be zoomed. Moving the cursor now will cause two rectangles to appear. The larger one represents what will be the edge of the window. Clicking the middle mouse button (or holding down the Shift key while clicking either the left or right button on a two-button mouse) will cause the contents of this rectangle to be redrawn to fill the window.

2-17