Xerox 07W & -11W, 05W manual Text Storage Code, Print, Special Options, Keyword=value,keyword=value

ICL FTF File Transfer

Text Storage Code

Factory default: Host Default

This specifies the code in which data is stored at the remote system. Usually you can leave this set to Host Default so that the remote system decides for itself what code the data is stored in.

Print

Factory default: Unselected

When selected, this will cause the file to be printed by the remote host after it has been received.

Special Options

This enables you to specify any special options to be actioned by the remote system. If you are transmitting to VME you can specify special options in the following format:

keyword=value[,keyword=value,...]

The relevant keywords are:

ALL influences the placement of new fully catalogued files

PRE B - Transfer records map on to physical blocks

R - Transfer records map on to CTM records

FDE File description to be used

For new fully catalogued files, the description used will be :STD.STDM, modified by one or more of the following values, provided that at least one of them is supplied:

BLO BLOCKSIZE

CLA CLASS

RMI RMIN

RMA RMAX

RTY RTYPE

ORG ORG

LOC For spool requests, defines the location at which the output is required.

PRF For spool (VME/B only) and job requests, defines the profile under which they should run.

Action Message

The message entered in this text box may be displayed to the remote operator when the transfer begins, depending on the remote system (not for VME).

9-9