Xerox 120, 144 specifications Operations, Supplies and Component Yields, Consumables

Xerox Nuvera® 100/120/144 EA Digital Production System - Customer Expectations Document

Operations

	Xerox Nuvera® 100/120/144 EA
Item		Comment
	Digital Production System
Power Up		If the environment does drift outside the specified range during
	7½ minutes	the systems’ powered down state, some period of image
		degradation can be expected at startup.
First Copy Out	8½ seconds (with one finisher and no	Copy job sent to the top tray; platen scan, simplex job, 8.5 x 11
Time (FCOT)	inserter)	LEF fed from tray 1
First Print Out	9½ seconds.	Printer should not cycle down as long as it receives an image
Time (FPOT)		to print within 5 seconds of completing the previous sheet.
Restart Time	5 minutes
		Vary by operating company / country; ask local analyst or
Billing Meters	Available via the Administration	sales representative to explain your meter operation.
	window.	Automated reading of the billing meter is available, if Remote
		Services are enabled.
Print Quality	Automatic, brief pauses for registration or
	xerographic process adjustments to
Adjustments
	maintain high image quality
	Switching between one-sided and two-	When producing collated sets run 1 to N, the system already
Mixed Plex	sided printing does cause some loss of
	productivity. The extent of the loss is	optimizes performance. In other cases, adding a blank side to
Printing
	directly related to the frequency of the	the job can minimize impact, but the sheet is billed.
	switch.

Supplies and Component Yields

The consumable supplies listed below are engineered specifically for use in the Xerox Nuvera® 100/120/144 EA Digital Production System and provide the highest and most consistent image quality, maximum machine productivity, and uptime.

All yield estimates are based on the indicated 6% area coverage at standardized conditions using 8 ½” x 11” / A4 Xerox 20 lb. bond (75 gsm) stock. Please note that actual yields vary greatly depending on area coverage, paper stock, and image quality control settings. The current estimates are shown below.

Consumables

Supply	Yield Estimates
EA Toner	210,000 prints/bottle; 1 bottle per system (2nd toner bottle is available as an option)
BFM 100 Sheet Staple refills and drivers.	15,000 staples per supply package,
	The package contains three 5000 staple refills and 3 drivers
BFM 30 Sheet Staple refills and drivers	15,000 staples per supply package,
	The package contains three 5000 staple refills and 3 drivers
MFF 100 Sheet Staple Cartridge	Comes installed in machine. Filled with 1 - 5,000 staple refill, this cartridge typically lasts the life
	of machine.
MFF 100 Sheet Staple Refills	5,000 staples per refill, 3 refills per carton
MFF 50 Sheet Staple Cartridge	Required for initial 50-sheet stapler capacity order. Filled with 1 - 5,000 staple refill, this
	cartridge typically lasts the life of machine.
MFF 50 Sheet Staple Refills	5,000 staples per refill, 3 refills per carton.
Staples Refills for MFF Booklet Maker	2,000 staples per box; 16,000 per carton
(1 for rear and 1 for front stapler required)	(8 Boxes per carton)

- 16 -