Xerox 120, 144 Multifunction Finisher Professional and Pro Plus, Professional Finisher

Xerox Nuvera® 100/120/144 EA Digital Production System - Customer Expectations Document

Multifunction Finisher: Professional and Pro Plus

Two configurations are offered – Professional and Pro Plus (available on the 100 & 120 ppm configurations only)

Professional Finisher

Top Tray / Offset Stacker / Stapler / Booklet Maker / Z-fold / C-fold

•Envelopes and Statement size paper (5.5” x 8.5”) will be delivered only to the top tray.

•Staple locations for non-standard size papers (e.g., standard sizes are A4, Letter size, etc.) will be slightly asymmetrical. The staple will be located in the position appropriate for the next nearest standard paper size.

•Certain stocks (stocks with high clay content and / or composed of other high density materials) may reduce the number of sheets that can be stapled and / or result in miss-staples.

•Imposition at the printer requires the optional Imposition feature license

Sub-system	Feature	Comments
Top Tray	250 sheet capacity (20 lb. bond)
	5.5” x 8.0” to 12.8” x 18.5”
Main Stacker	2000 sheet capacity	• Output is normally delivered 1-n, face down
	5.83” x 8.0” to 12.8” x 18.5”	to the main tray; jobs can be programmed
		for face up delivery if desired but stapling
		position & orientation will not be optimal
		• The system will cycle down when the
		stacker is full; overflow will not go to the top
		tray
		• Sizes can be mixed in the stacker, however
		mixed size stacks should be closely
		monitored to ensure stack stability
		• The maximum stack size capability is
		degraded for thin stapled sets.
Stapler	• Staples up to 100 sheets 20 lb. bond of paper	• The number of sheets that can be stapled
	sized 8.5” x 14” or less with 100 sheet staple	will decrease in relationship to the weight of
	cartridge loaded. With 11” x 17” / A3 20 lb.	the paper.
	Bond paper, up to 50 sheets can be stapled.	• Does not staple tabs or transparencies
	• Staples up to 50 sheets 20 lb. bond paper sized
		• The staple placement on the page is shown
	11” x 17” / A3 or less with 50 sheet staple
		on the controller
	cartridge loaded
	• One or Two Staples
Booklet maker	• C – fold	• C - fold and Z- fold weight range is 16 to 32
	1 sheet Letter and A4 sizes	lb. (60 to 120 gsm)
	• Z – fold
	1 sheet Letter and A4 sizes	• Bi-fold & Booklet sheet capability is reduced
	• Bi – fold
	5 sheet capacity (20 lb. stock), Letter (8.5” x	with heavier stocks
	11”), A4, Foolscap (8.5” x 13”), Legal (8.5” x
	14”), Ledger (11” x 17”) and A3 sizes.	• No face trim
	• Booklets – Dual Staple
	15 sheet capacity (20 lb. stock), Letter (8.5” x	• No Engineering folder
	11”), A4, Foolscap (8.5” x 13”), Legal (8.5” x	• No hole punch
	14”), Ledger (11” x 17”) and A3 sizes.

- 40 -