Xerox Nuvera® 100/120/144 EA Digital Production System - Customer Expectations Document
GBC Fusion Punch II with
Offset Stacker
The GBC Fusion Punch ll provides inline printer punching combining printing and punching into one step. Single sheets are punched and emerge ready to be finished into lay flat documents. These types of documents are typically bound with coil, wire or plastic comb binding and will lay flat when opened.
A wide variety of hole punch patterns are available. The die sets are lightweight and do not require setup
adjustment time when changed. The operator can easily replace them. The attached stacker can offset stack up to 2,500 sheets preparing each document for immediate binding. The Fusion Punch II can also be equipped with an optional Bypass Stacker. This allows the operator to empty one stacker while the other stacker is in use.
A Finisher Transport Module is required for
Please refer to the GBC Fusion Punch II Solutions Planning Guide for further site planning information, system dependencies, limitations, valid configurations and device specifications.
| Dimensions |
|
| GBC Fusion Punch II | Bypass Stacker | Offset Stacker | |||
| Width x Depth x |
| 54” x 32 ” x 46 ” | 27” x 32” x 46” | 27” x 32 ” x 46” | ||||
| Height |
| (1372 mm x 813 mm x 1168 mm) | (686 x 813 x 1168 mm) | (686mm x 813mm x 1168mm) | ||||
| Input Height |
|
| 34” (860mm) | NA | NA |
| ||
|
|
| 40.3” | (1024mm) |
|
|
| ||
|
|
|
|
|
|
| |||
| Weight |
|
| 620 lbs. | (281 kg) | 520 lbs (236 kg) | 270 lbs | (123 kg) | |
| Weight - Shipping |
|
| 920 lbs | (471 kg) | 720 lbs (326 kg) | 470 lbs | (213 kg) | |
| Clearance: Operator |
|
| Minimum 24 ” in front of module | Minimum 24” in front of module | Minimum 24 ” in front of module | |||
| Clearance: Service |
|
| Minimum 36 ” on all sides | Minimum 36” on all sides | Minimum 36 ” on all sides | |||
|
|
|
|
|
|
|
|
|
|
| Electrical & Environmental |
|
|
| GBC Fusion Punch II |
| |||||
|
|
| Minimum |
|
| Maximum |
| ||||
|
|
|
|
|
|
|
|
|
| ||
| Temperature Range |
|
| 41° F (40° C) |
|
| 104° F (50° C) |
| |||
| Humidity Range |
|
|
| 30% RH |
|
| 95% RH |
| ||
| Heat Output |
|
|
| 1198 btu/hr. (115 V 60 Hz) |
|
| 2150 btu/hr. (230 V 50 Hz) |
| ||
| Punch & Stacker |
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
| |||
| Altitude |
|
|
|
|
|
| 3280ft (1000m) |
| ||
| Sound Emission (with stacker) |
|
| 64.7 dBs (Idling) |
|
| 73.7dBs(Running, Punch & Stacker) |
| |||
| Power |
|
| Punch |
|
| 115VAC, 60 Hz, 4.7A (230VAC, 50Hz, 6.8A) |
| |||
| - Dedicated outlet |
|
|
|
|
|
|
|
|
|
|
|
|
| Stacker |
|
| 115VAC, 60 Hz, 1.0A (230VAC, 50Hz, 0.25A) |
| ||||
| recommended |
|
|
|
|
| |||||
| Certification |
|
|
|
| US/Canadian approval by CSA. GS mark by TUV Product Services |
| ||||
| Compliance |
|
|
| CE for European Union requirement |
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
- 57 -
