Xerox 144, 120 Introduction, Product Overview, Crucial Performance Expectations, Envelopes

Xerox Nuvera® 100/120/144 EA Digital Production System - Customer Expectations Document

Introduction

The purpose of this document is to help you understand the current features and capabilities of the Xerox Nuvera® 100/120/144 EA Digital Production System (DPS). Review of this material is recommended prior to your signing an order for a Xerox Nuvera® 100/120/144 EA Digital Production System.

This document addresses high-level expectations. Additional details are provided in the training documentation.

Product Overview

The Xerox Nuvera® 100/120/144 EA Digital Production System sets a new benchmark in the world of on- demand printing. It is a networked printing system comprised of multiple modules. The Xerox FreeFlow™ Document Services Platform (FreeFlow™ DocuSP®) is integrated into the Printer Module. The printer module may be acquired with simplex, letter size / A4 speeds of 100, 120 or 144 impressions per minute. The optional Scanner Module with 300 sheet input tray scans at 120 images per minute, simplex or duplex at 600 x 600 dpi. Two Sheet Feed Modules (SFM's) are available, one with 4 trays, the other with 2 trays having more large-format capacity. A SFM may also be installed after the printer module and used as an inserter. The Printer module prints at 4800 x 600 dpi utilizing a state of the art dual beam laser raster output scanner (ROS) with dedicated image processing hardware. The Finishing Transport Module (FTM) provides the capability to interface with a variety of production inline document finishing architecture (DFA) finishing devices. The Basic Finishing Module (BFM) stacks and provides stapling in single or dual positions. Up to two BFM modules (one a BFM Plus) can be used to enable continuous running with unload while run capability. A BFM Plus module can also be used in tandem with the FTM to enable inline DFA finishing. The Xerox Nuvera® EA DPS, with the above production finishing options, has a wide range of paper latitude, including coated stocks. Alternatively, the 100 and 120 ppm versions of the Xerox Nuvera® EA DPS can also be used with a Mutifunction Finisher module, providing flexible mid-range finishing options.

Crucial Performance Expectations

The Xerox Nuvera® 100/120/144 EA Digital Production System is a “clean-sheet” design utilizing innovative technologies. It is the new base platform for Xerox monochrome products.

The following expectations should be explicitly set. Please see the appropriate section of this CED for further detail.

Availability

The Xerox Nuvera® 100/120/144 EA Digital Production System will be available on a monthly average 92 – 95%of the time.

•Availability is defined as all of the time the machine is not being serviced, or waiting for service.

•Given similar service coverage, DocuTech® / DocuPrint® availability averages up to 95%.

Media Capability

•Approved stocks can be found in the Compatible Media List in this document

•Reinforced stocks should be limited to 90 sheets loaded in a tray at one time

•The system performs more reliably with long grain paper

•Windowed stocks are not supported – performance (jams) maybe degraded.

•Envelopes

Envelopes should be limited to 60 loaded in a tray at one time. Nuvera® feeder trays feed until almost empty but not until empty, leaving 20~40 sheets remaining. When running envelopes frequent reloading of the feeder trays will be required.

Very slight wrinkles (1/2 inch long) may occur on the trail edge of envelopes at the corners.

- 5 -